Specifying the Document Size
You can manually specify the document size when the machine cannot detect the
paper size automatically, such as when scanning transparencies.
IMPORTANT
• The machine cannot automatically detect the size of the originals listed below. Specify
the size of these documents manually.
3
- Nonstandard size originals
- Highly transparent originals, such as transparencies
- Originals with an extremely dark background
- A5R or smaller than A5 originals that are placed on the platen glass (A5 originals are
• If a document size setting other than [Auto] is specified, the following modes cannot be
used:
- Different Size Originals (See "Scanning Different Size Originals Together (Different
- Stamp (See "Stamping Originals Which Have Already Been Scanned," on p. 3-23.)
• If you place your originals into the feeder, their horizontal length (X) to the scanning
direction is scanned at the actual size of your originals even if you manually specify the
document size different from your originals. The vertical length (Y) to the scanning
direction is scanned at the document size you specify manually.
NOTE
The default setting is 'Auto'.
3-6
Specifying the Document Size
available on imageRUNNER 2545i/2545/2535i/2535)
Size Originals)," on p. 3-15.)