Checking The Dial Tone Before Sending - Canon ImageRUNNER 2545i Sending And Facsimile Manual

Checking the Dial Tone Before Sending

You can set whether to check for the dial tone before dialing when sending a fax.
NOTE
The default setting is 'On'.
1
Press
[TX Settings] under <Fax Settings>.
For help, see steps 1 to 3 in "Sending with Error Correction Mode (ECM
Transmission)," on p. 7-23.
2
7
3
4
Press
NOTE
The Check Dial Tone Before Sending mode is enabled only after you restart the
machine (the main power switch is turned OFF, then back ON again).
7-30
Transmission Related Items
(Additional Functions) ➞ [Communications Settings] ➞
(Reset) to return to the top screen.
Press [Check Dial Tone Before
Sending].
Select [On] or [Off] ➞ press [OK].