Product Overview; Controls - Toro 22306 Operator's Manual

Product Overview

1. Track
2. Track adjustment chamber
3. Lift cylinder
4. Cylinder lock

Controls

Become familiar with all the controls (Figure 4)
before you start the engine and operate the traction
unit.
Figure 4
1. Traction control
2. Loader arm/attachment tilt
lever
3. Auxiliary hydraulics lever
4. Reference bar
5. Throttle lever
6. Choke lever
Key Switch
The key switch, used to start and stop the engine,
has three positions: off, run, and start.
Figure 3
5. Loader arms
6. Hood
7. Auxiliary hydraulic couplers 11. Control panel
8. Tilt cylinder
7. Fuel gauge
8. Hydraulic oil temperature
light
9. Hour meter/tachometer
10. Key switch
11. Parking brake lever
9. Mount plate
10. Tie-down/lift loop
12. Rear access cover
To start the engine, rotate the key to the start
position. Release the key when engine starts and it
will move automatically to the run position.
To stop the engine, rotate the key to the off
position.
Throttle Lever
Move the control forward to increase the engine
speed and rearward to decrease speed.
Choke Lever
Before starting a cold engine, move the choke
lever forward. After the engine starts, regulate the
choke to keep the engine running smoothly. As
soon as possible, move the choke lever all the way
rearward.
Note: A warm engine requires little or no
choking.
Reference Bar
When driving the traction unit, use the reference
bar as a handle and a leverage point for controlling
the traction control and the auxiliary hydraulics
lever. To ensure smooth, controlled operation, do
not take both hands off of the reference bar while
operating the traction unit.
13
13. Fuel tank
14. Reverse safety plate