Toro 38700 Service Manual page 50

28. The wheels are installed with the V-tread
rotation forward.
29. Bolt the wheel hub to the axle shaft and torque to
115 +/- 15 in - lbs (13 +/- 1.7 Nm).
30. Install the belt cover.
31. Check clutch cable adjustment and adjust
if necessary. Refer to "Traction Cable Adjustment"
on page 3-6.
Walk-Behind Rotary Broom Service Manual
TRACTION DRIVE SYSTEM
Wheel Clutch Disassembly
1. Remove the 11-tooth gear from the 32-tooth gear by
sliding it off the shaft.
Fig. 064
2. Slide off the washer behind the 11-tooth gear.
Fig. 065
Fig. 066
Fig. 067
5-17