Toro 38700 Service Manual page 43

TRACTION DRIVE SYSTEM
26. Remove the pivot pulley plate assembly from
the housing.
27. Remove the locknut from pivot pulley and separate
the pulley from the plate.
5-10
Drive System Assembly
1. Install the pivot plate assembly into the housing and
install the belt. The idler pulley (A) should be pushed
away from you to install the pivot plate.
Fig. 032
2. Install the two bushings and the two "C" clips onto
the pivot plate shaft.
Fig. 033
Fig. 034
A
Walk-Behind Rotary Broom Service Manual
Fig. 035
Fig. 036