Toro 38700 Service Manual page 44

3. Install the speed control linkage (B) through the pivot
plate and install the hairpin cotter (A) into the hole of
the speed control linkage on the outside of the
pivot plate.
4. Install the long end of the spring to the cut out on the
pivot plate.
5. Install the short end of the spring to the frame.
Walk-Behind Rotary Broom Service Manual
B
A
Fig. 037
Fig. 038
TRACTION DRIVE SYSTEM
6. Install the friction wheel assembly. Lay the shift
mechanism onto the housing and insert the shift
shaft into the friction wheel assembly in the
direction shown.
NOTE
It is important that the friction wheel and shift mechanism
are to the right of the unit as shown and that the wheel is
free of dirt, oil, anti-seize or any other lubricant.
Fig. 039
5-11