20. Remove the hairpin cotter connecting the speed
control linkage to the pivot pulley plate assembly.
21. Remove the extension spring from the housing.
22. Slide the speed control linkage from the pivot pulley
plate assembly.
Walk-Behind Rotary Broom Service Manual
TRACTION DRIVE SYSTEM
23. Place the unit back onto the broom housing.
24. Remove the retaining ring from both sides of the
housing and slide the nylon bushing off the pivot
pulley plate shaft.
Fig. 026
Fig. 027
25. Tilt the pivot pulley assembly to release the traction
belt tension and remove the belt from the traction
pulley.
Fig. 028
Fig. 029
Fig. 030
Fig. 031
5-9