4. Reach under the shift plate and compress the small
ears on the cable fitting. The cable fitting can then
be pushed out of the shift plate.
5. Disconnect the lower end of the cable from the
shift collar.
Walk-Behind Rotary Broom Service Manual
Replacement
1. Feed the lower end of the cable through the shift
plate and snap the cable into the plate. Install the
lower end of the cable into the shift collar outside in.
Fig. 014
2. Hook the upper end of the cable to the wheel clutch
lever and install the cable clamp to the handle.
3. Loosen the cable clamp nut.
Fig. 015
CONTROLS
Fig. 016
Fig. 017
3-7