Shift Lever; Shift Rod Adjustment; Auger Control - Toro 38700 Service Manual

CONTROLS

Shift Lever

The shift lever on the control panel is connected to the
friction wheel in the traction drive by a shift rod. Moving
the shift lever moves the friction wheel to change wheel
direction and speed.

Shift Rod Adjustment

1. The adjustment point is a trunion on the upper end
of the shift rod.
3-4
2. Pull the shift rod and arm upward as far as they will
go. With the shift lever in R2, adjust the trunion to
take the slack out and re-secure.
NOTE
Fig. 003
Excessive slack in the linkage may cause the drive to be
in reverse when shifted into first gear.

Auger Control

The bail on the right hand handle is the auger control.
Squeeze the bail and the cable causes an idler to pivot,
tensioning the auger belt.
Fig. 004
Walk-Behind Rotary Broom Service Manual
Fig. 005
Fig. 006