TRACTION DRIVE SYSTEM
23. Install the Z-bend of the clutch cable from outside to
inside of the shift collar.
24. Install the shift rod/traction rod lever onto the
housing making sure the traction control fits into the
friction wheel.
5-16
25. Install the lower cover.
Fig. 058
26. Install the upper and lower covers, with the upper
cover overlapping the lower cover.
Fig. 059
27. Connect the shift linkage to the shift rod/traction
rod lever with a washer between the linkage and
hair pin.
Fig. 060
Walk-Behind Rotary Broom Service Manual
Fig. 061
Fig. 062
Fig. 063