Auger Belt Removal - Toro 38700 Service Manual

Auger Belt Removal

1. Remove the belt cover.
2. Remove the belt guide. Be careful to avoid bending
the guide.
Walk-Behind Rotary Broom Service Manual
BELT REPLACEMENT BELT REPLACEMENT
3. Remove the bolt securing the engine pulley to
the crankshaft. If necessary, you can hold the
hub between the pulley and engine to keep the
crankshaft from turning (A). Remove the pulley
sheave and the auger belt from the crankshaft.
Fig. 002
4. The auger belt can now be removed from the
impeller pulley.
Fig. 003
A
Fig. 004
Fig. 005
4-3