Maintenance; Recommended Maintenance Schedule - Toro 09802 HydroJect 3010 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service
Interval
After first 25 hours
After first 50 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Every 1000 hours or 2
years, whichever occurs
first
Water System Accumulator
Due to the operational requirements of the accumulator design, the high pressure internal gas pre–charge can bleed out during
periods of inactivity. Storing the Hydroject for extended periods of time (3 months or longer) and/or seasonal temperature
variances can affect the accumulators ability to retain a sufficient pre–charge and seasonal servicing (recharge) may be
required.
If one of the accumulator charge indicator lamps illuminates, contact your authorized Toro Distributor for accumulator
maintenance services.
Maintenance Procedure
• Change the engine oil and filter.
• Change the gear case oil and filter.
• Change the pump case oil.
• Torque the wheel lug nuts.
• Check the engine RPM (idle and full throttle).
• Check the battery cable connections.
• Lubricate all grease fittings.
• Change the engine oil and filter.
• Replace the primary air filter element.
• Check the inner air filter element.
• Replace the fuel filter.
• Adjust the water system cam—valve clearance.
• Change the gear case oil and filter.
• Change the pump case oil.
• Torque the wheel lug nuts.
• Adjust the parking brake.
• Calibrate the aeration traction speed.
• Service the injector nozzles and springs.
• Replace the spark plugs.
• Check the engine RPM (idle and full throttle).
• Replace moving hoses.
• Replace safety switches.
• Drain and flush the fuel tank.
• Drain and flush the hydraulic tank.
_____
23