Sound Pressure Level; Sound Power Level; Vibration Level; Safety And Instruction Decals - Toro 09802 HydroJect 3010 Operator's Manual

• Park machine on level, hard ground. Never allow
untrained personnel to service machine.
• Use jack stands or safety latches to support components
when required.
• Carefully release pressure from components with stored
energy.
• Disconnect battery or remove spark plug wire before
making any repairs. Disconnect the negative terminal
first and the positive last. Reconnect positive first and
negative last.
• Keep hands and feet away from moving parts. If
possible, do not make adjustments with the engine
running.
• Charge batteries in an open well ventilated area, away
from spark and flames. Unplug charger before
connecting or disconnecting from battery. Wear
protective clothing and use insulated tools.
• Keep all parts in good working condition and all
hardware tightened. Replace all worn or damaged
decals.

Safety and Instruction Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or lost.
80-8000
80-8880
80-8760
• Use only Toro-approved attachments. Warranty may be
voided if used with unapproved attachments.

Sound Pressure Level

This unit has an equivalent continuous A–weighted sound
pressure level at the operator ear of 93 dBA, based on
measurements of identical machines per Directive
98/37/EC and amendments.

Sound Power Level

This unit has a guaranteed sound power level of:
108 dBA/1 pW, based on measurements of identical
machines per Directive 2000/14/EC and amendments.

Vibration Level

This unit does not exceed a vibration level of 4.0 m/s@ at
the hands based on measurements of identical machines per
ISO 5349 procedures.
1. Parking brake
2. Locked
5
93-9363
3. Unlocked
80-8090