Parameter List - Mitsubishi Electric F700 Instruction Manual

4.2 Parameter List

4.2.1 Parameter list
In the initial setting, only the simple mode parameters are displayed.
Set Pr. 160 User group read selection as required.
Parameter Name
User group read
160
selection
REMARKS
⋅ The parameters marked
⋅ The parameters marked with
value) is set in Pr. 77 Parameter write selection.
⋅ Refer to the appendix 2 (page 288) for instruction codes for communication and availability of parameter clear, all clear, and
parameter copy of each parameter.
Function Parameters
0
Torque boost
1
Maximum frequency
2
Minimum frequency
3
Base frequency
4
Multi-speed setting (high speed)
5
Multi-speed setting (middle speed)
6
Multi-speed setting (low speed)
7
Acceleration time
8
Deceleration time
9
Electronic thermal O/L relay
DC injection brake operation
10
frequency
11
DC injection brake operation time
12
DC injection brake operation voltage
 13
Starting frequency
14

Load pattern selection
15
Jog frequency
16
Jog acceleration/deceleration time
 17
MRS input selection
 18
High speed maximum frequency
19

Base frequency voltage
Initial Setting
Value Range
9999
9999
are the simple mode parameters.
in the table allow its setting to be changed during operation even if "0" (initial
Name
Only the simple mode parameters can be displayed.
Simple mode and extended mode parameters can be
0
displayed.
Only the parameters registered in the user group can be
1
displayed.
Minimum
Setting Range Setting
Increments
0 to 30%
0 to 120Hz 0.01Hz
0 to 120Hz 0.01Hz
0 to 400Hz 0.01Hz
0 to 400Hz 0.01Hz
0 to 400Hz 0.01Hz
0 to 400Hz 0.01Hz
0 to 3600/ 360s 0.1/0.01s
0 to 3600/ 360s 0.1/0.01s
0 to 500/0 to 3600A 0.01/0.1A
0 to 120Hz, 9999 0.01Hz
0 to 10s
0 to 30%
0 to 60Hz 0.01Hz
0, 1
0 to 400Hz 0.01Hz
0 to 3600/360s 0.1/0.01s
0, 2
120 to 400Hz 0.01Hz
0 to 1000V, 8888, 9999
Parameter List
Remarks
Refer
Initial
to
Value
Page
6/4/3/2/
0.1% 70
1.5/1%
120/60Hz 78
0Hz 78
60Hz 80
60Hz 84
30Hz 84
10Hz 84
5s/15s 91
10s/30s 91
Rated inverter
95
current
3Hz 98
0.1s 0.5s 98
0.1% 4/2/1% 98
0.5Hz 93
1 1 82
5Hz 86
0.5s 86
1 0 103
120/60Hz 78
0.1V 9999 80
Customer
Setting
4
59