Smash For Server Blades - Hitachi Compute Blade 2000 User Manual

SMASH for server blades

This section describes SMASH (Systems Management Architecture for Server Hardware)
supported by X57A2, X55R3, and X55S3 server blades.
SMASH functions are supported with the following BMC firmware version.

BMC: 05-50 or later, or 07-01 or later with a standard server blade, X55R3 or
X55S3, or X55R4 model
BMC: 06-01 or later with a high-performance server blade, X57A2 model
SMASH overview
Systems Management Architecture for Server Hardware (SMASH) is a standard
management tool for server hardware provided by Distributed Management Task
Force (DMTF). You can use SMASH to perform operations including powering on or
off a server blade and refer to FRU information. X57A2, X55R3, X55S3, and X55R4
server blade models can use SMASH with SMASH- CLP (Command Line Protocol)
and WS-MAN (Web Services Management). See the DMTF Web site shown below
for details about SMASH and WS-MAN.
http://dmtf.org/
SMASH features
The following items are available for SMASH with Compute Blade 2000.
SMASH Operations
#
1 Shows server blade status.
2 Powers on the server blade.
3 Powers off the server blade.
4 Performs server blade hardware reset.
5 Shows processor status.
6 Shows memory status.
7 Shows power supply module status.
8 Shows fan module status.
9 Shows sensor information.
10 Shows FRU information.
11 Switches boot devices.
12 Shows account information.
13 Restarts BMC.
Operation
1790