Siemens Sinumerik 840D sl Diagnostic Manual page 618

Overview of Alarms
HMI-Alarms
120303 The selection is not possible. The edited file %1 no longer exists.
Parameters: %1 = Program name with path
Definitions: The file edited last in the program area has in the meantime been deleted.
Reaction: Alarm display.
Remedy: The alarm disappears automatically as soon as a program is edited or simulated in the program area.
The alarm can also be acknowledged manually via diagnostics.
Program Con- Internal
tinuation:
120304 The selection is not possible. The file %1 has insufficient read rights.
Parameters: %1 = Program name with path
Definitions: The file has insufficient read rights for the current access level.
Reaction: Alarm display.
Remedy: Set the required read rights by means of keyswitch or password entry.
The alarm disappears automatically as soon as a program is edited or simulated in the program area.
The alarm can also be acknowledged manually via diagnostics.
Program Con- Internal
tinuation:
120305 Selection is not possible. The file %1 is currently being edited.
Parameters: %1 = Program name with path
Definitions: The file is currently open in another application (e.g. services) with an editor.
Reaction: Alarm display.
Remedy: Change the program in the already open editor.
The alarm disappears automatically as soon as a program is edited or simulated in the program area.
The alarm can also be acknowledged manually via diagnostics.
Program Con- Internal
tinuation:
120306 The selection is not possible. The file %1 is selected and active in
channel %2.
Parameters: %1 = Program name with path
%2 = Channel number
Definitions: --
Reaction: Alarm display.
Remedy: Stop the program with the NCU's channel reset and make the selection again.
The alarm disappears automatically as soon as a program is edited or simulated in the program area.
The alarm can also be acknowledged manually via diagnostics.
Program Con- Internal
tinuation:
120307 File %1 cannot be opened for the editor because it is selected in channel
%2 for execution by external sources.
Parameters: %1 = Program name with path
%2 = Channel number
Definitions: --
Reaction: Alarm display.
Remedy: A different program on the NCU or for execution from external sources has to be selected.
The alarm disappears automatically as soon as a program is edited or simulated in the program area.
The alarm can also be acknowledged manually via diagnostics.
Program Con- Internal
tinuation:
120308 In the event of an emergency stop, the program %1 can only be changed
in the machine/program correction area.
Parameters: %1 = Program name with path
Definitions: --
Reaction: Alarm display.
2-618
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
© Siemens AG 2009 All Rights Reserved
03/2009