Installation - HIKVISION DS-2CD883F-EW Installation Manual

Installation Manual of Network Camera

4.1.2 Installation

Bullet camera can be installed to wall or ceiling. Wall mounting is taken as an example in this section; if you
adopt ceiling mounting, you can also take below procedure as a reference.
Steps:
1. Fix the mounting base to the wall. The mounting base can also be used to hide the cables.
Notes:
 Please apply water-proof measures between the ceiling surface and mounting base and around the cables.
 For cement wall mounting, you need to use the expansion screw to fix the mounting base. The mounting
hole of the expansion pipe on the wall should align with the mounting hole on the mounting base.
 For wooden wall mounting, you can just use the self-tapping screw to fix the mounting base.
 The wall must be strong enough to withstand more than 3 times the weight of the camera and the
bracket.
2. Attach the mounting bracket with the camera to the mounting base with the safety rope (not shown in the
figure below). Fix the mounting bracket with the camera to the mounting base with screws.
Figure 4-3 Wiring Diagram
Figure 4-4 Secure the Mounting Base
58