Installation - HIKVISION DS-2CD883F-EW Installation Manual

Installation Manual of Network Camera
No.
1
2
3 ACT: Indicator flashes blue when network connection is functioning properly.
4
5
6
7
8
9
Notes:

The extended interface can be connected to alarm input/output interface, audio input/output
interface, RS-485 interface, etc.

To reset the default parameters to the camera, you need to press and hold the RESET button
and power on the camera. After the power on of the camera, you must still press and hold the
Reset button for about 20 seconds
Camera wiring Diagram:

3.2.4 Installation

Ceiling mounting:
Steps:
1. Drill the screw holes on the ceiling with the supplied drilling template. If you need to route the
cables from the bottom of the camera, cut a cable hole in the ceiling.
Figure 3-15 Overview
Table 3-2
Video output interface
LINK: Indicator is solid yellow when network is connected.
PWR: Indicator is solid red when the device is powered on.
RESET: Reset button
10M/100M self-adaptive Ethernet interface
Power supply interface
Extended interface
Figure 3-16 Wiring Diagram
Description
Description
Micro SD slot
15