Chapter 3 Dome Camera Installation; Dome Camerai; Appearance Description - HIKVISION DS-2CD883F-EW Installation Manual

Installation Manual of Network Camera

Chapter 3 Dome Camera Installation

3.1 Dome Camera I

3.1.1 Appearance Description

Camera description:
Note: To reset the default parameters to the camera, you need to press and hold the RESET button
and power on the camera. After the power on of the camera, you must still press and hold the
Reset button for about 20 seconds
Camera wiring Diagram:
Figure 3-1 Overview
Table 3-1
No. Description
1 10M/100M self-adaptive Ethernet interface
2 INITIAL SET: Reset button
3 AUDIO OUT: Audio output interface
4 MIC IN: Audio input interface
5 D+, D-: RS-485 interface
6 1A, 1B, 2A, 2B: Alarm output interface
7 IN1, GND, IN2, GND: Alarm input interface
8 Power supply interface
Description
8