Honeywell XYR 400E User Manual page 73

In the Network A PC a routing rule is to be set.
This will allow Network A & B to have access to each other. This is entered under cmd prompt.
Route ADD 192.168.2.0 MASK 255.255.255.0 192.168.0.191
This says access everything on network B (192.168.2.0) with the Mask of 255.255.255.0 on
Network A via the Ethernet IP Interface 192.168.0.191
IP Address 192.168.2.0 will allow everything on this network to be shared by the router. When
adding a routing table you will need to enter this in. Once entered in the Router will determine
whether to pass information over the router if it is addressed to do so or not. For added security
MAC address filtering could be added as mentioned earlier in Section 3.
73 XYR400E Ethernet Modem Version 1
5/1/08