Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Modem
  5. XM500
  6. Manual

Honeywell XM500 Manual

Tcp/ip modem
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
GENERAL
The XM500 allows for communication between standard
EXCEL 5000 controllers and the Excel Building Supervisor
Central, or any controller on the Light Commercial Building
System (LCBS) and L
S
ON
TATION
TCP/IP based LAN/WAN networks.
The XM500 is easy to install and to configure. Typically, with
all necessary network information being available, it can be
made operational within minutes.
The XM500 converts the serial data received from the
controller or workstation central into TCP/IP packets and vice
versa.
On its serial port, the XM500 behaves like a standard Hayes
compatible modem: It is addressed with Hayes commands,
and instead of a telephone number, IP addresses are used.
The XM500 is designed to replace the analog modem used in
our Excel 5000 and LCBS systems and provide the same
functionality using TCP/IP communications.
The XM500 may be easily configured with the IP Connect
software provided or manually via Windows Terminal
Program. The LAN/WAN network server requires no software
download for the XM500.
® U.S. Registered Trademark
Copyright © 2003 Honeywell International Inc.
All Rights Reserved
™, via standard Ethernet-
TCP/IP Modem
FEATURES
• Communication between XBS or L
centrals and EXCEL 5000 controllers via standard
Ethernet-TCP/IP LAN/WAN.
• TCP/IP provides more reliable and faster
communications than analog modem.
• Compatible with all HVAC systems connecting through
an SLTA-10.
• Compatible to EXCEL 5000 controllers with integrated
modem communication (O.S. version 2.01.00 or later).
• Compatible to EXCEL 5000 modem devices XM100A,
XDM506.
• Compatible to all XBS or L
dial-up functionality via COM-port.
• Completely self-contained device.
• Quick and easy installation and set-up.
LIMITATIONS
The Echelon MIPS protocol requires all outbound commands/
queries be answered within 1000 milliseconds (1 sec). If any
part of the Wide Area Network is comprised of a satellite link,
it is likely to have a "propagation delay" of more than one
second, thus eliminating the use of a WAN modem. Before
installation, the user should perform tests to obtain the
response time of the network. (See "Configuration" on
page 3.)
General .............................................................................
Features ...........................................................................
Limitations ........................................................................
Specifications ...................................................................
Ordering Information ........................................................
Configuration ....................................................................
Programming The Xm500 .................................................
XM500
PRODUCT DATA
S
™
ON
TATION
S
™ centrals with
ON
TATION
Contents
74-3468-3
1
1
1
2
2
3
4
6

Advertisement

loading

Related Manuals for Honeywell XM500

Summary of Contents for Honeywell XM500

  • Page 1 TCP/IP based LAN/WAN networks. The Echelon MIPS protocol requires all outbound commands/ The XM500 is easy to install and to configure. Typically, with queries be answered within 1000 milliseconds (1 sec). If any all necessary network information being available, it can be part of the Wide Area Network is comprised of a satellite link, made operational within minutes.

  • Page 2: Specifications

    If you have additional questions, need further information, or would like to comment on our products or services, please write or phone: 1. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory). 2. Honeywell Customer Care...

  • Page 3: Configuration

    PC must be switched off LINK during this test. If an XM500 is connected to a LAN network which itself is connected to WAN by using one official IP address only via Proxy server or dynamic NAT, this controller cannot be addressed from the WAN.

  • Page 4: Programming The Xm500

    RS-232C cable. 17. Click on the Download button. 4. Hook the DB9 female plug of the converter to Port #1 18. Wait for the status bar to read: XM500 is configured on the PC. successfully (see Fig. 6).

  • Page 5: An Slta.

    1. Connect an Ethernet cable (RJ-45 to RJ-45) to the TPE Types. port of the XM500 and to the Ethernet LAN socket with 9. Under Models column, click Standard 28800 bps the IP address that was configured for the modem.

  • Page 6: Technical Installation And Set-Up (Optional)

    XM500 for the required serial behavior. RS-232 Breakout Box AT Commands for XM500 Connected to XL5000 As the XM500 does not provide LED indication of the line Controllers with O.S. 2.01.00 or Later and for status of TxD, RxD and other control, using a standard XBS via COM Port RS-232 breakout box can be helpful.
  • Page 7 PCs. PC terminal baud rate MUST be set to that which Dial (connect) to an IP address. Format of the address the attached XM500 was programmed. (addr) is: 2. <ping> the IP address of the XM500 to which the other xxx,xxx,xxx,xxx [;port] PC is connected. xxx.xxx.xxx.xxx [:port] EXAMPLE: Command: <ping 160.221.71.131>...

  • Page 8: Verbose Result Codes

    Corporation. TATION By using this Honeywell literature, you agree that Honeywell will have no liability for any damages arising out of your use or modification to, the literature. You will defend and indemnify Honeywell, its affiliates and subsidiaries, from and against any liability, cost, or damages, including attorneys’...