Table of Contents
Advertisement
This document describes preparation, operation and maintenance of the XYR 400E Ethernet Modem. Mounting,
installation and wiring are covered in other documents.
Honeywell does not recommend using devices for critical control where there is a single point of failure or where single
points of failure result in unsafe conditions. XYR3000 is targeted at open loop control, supervisory control, and controls
that do not have environmental or safety consequences. As with any process control solution, the end-user must weigh the
risks and benefits to determine if the products used are the right match for the application based on security, safety, and
performance. Additionally, it is up to the end-user to ensure that the control strategy sheds to a safe operating condition if
any crucial segment of the control solution fails.
Revision Information
Document Name
XYR 400E Wireless Ethernet User's Manual
References
The following list identifies all documents that may be sources of reference for material discussed in this publication.
Getting Started with Honeywell One Wireless solutions
XYR3000 MSG
How to build an XYR3000 system
3
About This Document
Document
ID
34-XY-25-26
Document Title
XYR400E Ethernet Modem
Version
Publication Date
Number
5/1/2008
Version 1
5/1/08
Advertisement
Table of Contents
