Table of Contents
Advertisement
13. Select Networking Tab -> click on Internet Protocol
(TCP/IP) in list box and then click Properties button.
14. On Properties form click Advanced button
17. Ensure both the username and the password are entered exactly as configured in XYR 400E.
(When booted in SETUP mode, the PPP server has username "user" and password "user".)
51
11. General Tab click on Configure button
12. Ensure maximum speed is 115200bps, click OK
15. On Advanced TCP/IP Settings form->General
Tab, uncheck field in PPP link stating "Use IP
header compression".
16. Configuration is now complete. Click on this
newly created link to establish a connection to
XYR 400E.
XYR400E Ethernet Modem
Version 1
5/1/08
Advertisement
Table of Contents
