Table of Contents
Advertisement
Introduction
Storage Estimator
Background Information
22
Web Site
To learn more about Honeywell products that can be used with your Multi-Media LT system
or to consult our library of user documentation, go to www.honeywellvideo.com.
The Storage Estimator is installed along with the Rapid Eye software. To run the storage
estimator, install the Rapid Eye software, and then:
1.
Select the Start menu
2.
Click Storage Estimator.
3.
Click OK on the About Storage Estimator window that appears.
4.
Change the recording options in the Estimator, as needed, and click Apply Options
to obtain an estimate of your system's storage capacity.
See the
Rapid Eye™ Multi-Media Digital Video Recorder System Administrator
for more information on the storage estimator.
Caution
Effective video feeds are a major component of any CCTV system.
Planning for camera position, distance from subject, angle and lighting
can be as critical as operating your Multi-Media LT DVR. For audio:
planning microphone position, distance from subject and alarm bells can
also be critical. Consult your camera and audio suppliers for optimal
hardware setup.
Caution
In LocalView, if the language settings are changed more than fifty (50)
times, Honeywell recommends rebooting the Rapid Eye LT DVR.
All Programs
Rapid Eye Multi-Media LT x.x.
Guide,
Advertisement
Table of Contents
