Port Use Restrictions; Internal Port: Internal Modem - Honeywell Rapid Eye LT Installation Manual

Site Hardware

Port Use Restrictions

Internal Port: Internal Modem

60
Assignment Limits
Up to four PIT serial devices can be supported. Four POS devices can be assigned to each
PIT device.
Configuring POS, PIT and NetPIT Devices for Rapid Eye
For procedures to configure POS devices, using the Serial Devices tab in the Maintenance
dialog, refer to the
Rapid Eye™ Multi-Media Digital Video Recorder System Administrator
Guide.
Multiple Serial Switches
Nested serial switches are not supported in Multi-Media LT software; please do not connect
more than one to a Multi-Media LT DVR.
During a maintenance session, the Serial Devices tab shows an Internal Port that either lists
a modem or nothing at all. If the Internal Port holds a modem, the modem cannot be
deleted. The internal port cannot receive devices from the New devices or the Unassigned
devices groups.
Note Internal modems are only included with Multi-Media LT NTSC units. PAL units
will need an external modem for use with a dial-up connection.