Table of Contents
Advertisement
Horizontal and Vertical Unit Installations
Installing Rubber Feet for a Vertical Installation
66
If you will be installing your Rapid Eye Multi-Media LT DVR vertically, use the following
procedure to change the rubber feet placement for a vertical installation:
1.
Unscrew the four rubber feet from the bottom of the Multi-Media LT unit. You should
be able to remove the rubber feet by hand.
2.
Screw the rubber feet into the four holes on the left side of the Multi-Media LT unit.
Turn the rubber feet clockwise to tighten them until they fit securely (see
Figure
C-1).
Advertisement
Table of Contents
