Storage Estimator; Background Information - Honeywell Rapid Eye Installation Manual

Introduction

Storage Estimator

Background Information

22
Note After installing the Rapid Eye software, documentation about Rapid Eye
Multi-Media (REM) is available at the operator's PC. Click Start
Programs
publication title (choose the document you want to view).
You can also consult the Rapid Eye™ Multi-Media Digital Video Recorder Remote View
Operator Guide, which offers more procedures and reference material.
Web Site
To learn more about Honeywell products that can be used with your Multi-Media system or
to consult our library of user documentation, go to www.honeywellvideo.com.
The Storage Estimator is installed along with the Rapid Eye Software. To run the storage
estimator, install the Rapid Eye software, and then:
1. Select the Start menu
2. Click Storage Estimator.
3. Click OK on the About Storage Estimator window that appears.
4. Change the recording options in the Estimator, as needed, and click Apply Options
to obtain an estimate of your system's storage capacity.
See the Rapid Eye™ Multi-Media Digital Video Recorder System Administrator
for more information on the storage estimator.
Caution Effective video feeds are a major component of any CCTV system.
Planning for camera position, distance from subject, angle and lighting
can be as critical as operating your Multi-Media DVR. For audio: planning
microphone position, distance from subject and alarm bells can also be
critical. Consult your camera and audio suppliers for optimal hardware
setup.
Caution In LocalView, if the language settings are changed more than fifty (50)
times, Honeywell recommends rebooting the Rapid Eye DVR.
Rapid Eye Multi-Media 9.0
All Programs Rapid Eye Multi-Media 9.0.
All
Documentation REM
Guide,