Status; Description; Selecting And Viewing; Escape - Honeywell Galaxy 3-144 User Manual

1001 INTRUDER
COMPUTER ROOM
2+1
1021 SECURITY
CASHIER DOOR
esc

Display Log (User Type 2.4 and Above)

PIN + ent
0 = OMIT ZONES
[ent] to Select
4
4 = DISPLAY LOG
[ent] to Select
ent
LOG A12345678
Groups NN------
1 + 2
LOG A12345678
Groups YY------
ent
08:53 TUE 22 NOV
AC FAIL-RIO108
B (hold)
MON 21 NOV 1999
MON 20 NOV 1999
release B

Status

The current status of the zone is displayed as circuit information, e.g.
Open or Closed. This information alternates with function information.

Description

The zone description, if programmed, is displayed on the bottom line
of the display. The descriptor is assembled from alpha-numeric text
and describes the zone in detail, e.g. West Office Door.

Selecting And Viewing

Selecting the Display Zones option displays the first zone address
available on the system. Other zones can be viewed sequentially by
using the >A or <B keys. Zones can also be displayed by entering the
address of the zone: enter the line, RIO and zone number (4 digits).
Press the # key to display the circuit resistance in ohms and RIO voltage
(if hardwired).

Escape

The esc key aborts the option and returns to the option menu.

Purpose

The Display Log option provides the user with a means of viewing the
system history. Events are recorded in detail and stored in the non-
volatile memory.

Selecting Display Log

Enter the QUICK MENU. Press key 4 followed by the ent key.
Details of the most recent event to be logged are displayed.

Events

The events available for display include details of setting, unsetting
and alarms. Each event is timed and date stamped.

Selecting a Date

Hold down one of the view keys, the dates held in the log are rapidly
stepped through. The A> key moves forward through the dates and the
<B moves backwards. Stopping at the required date reveals the first
event for that date.

Viewing Each Event

The entire events of any one date can be viewed by progressively
stepping through the events using the A> and <B view keys.
If the user has group choice enabled, the groups will display. Events for
each group can be displayed by entering the group number.
13
*