Draytek Vigor3900 Series User Manual page 93

Available parameters are listed as follows:
Item
Profile
Enable This Profile
Description
VLAN ID
Default MAC
Address
MAC Address
IPv4 Protocol
Mode
IP Address
Subnet Mask
Gateway IP
Address
nd
2
Vigor3900 Series User's Guide
Description
Type the name of the LAN profile.
Check this box to enable such profile.
Type the description for the new LAN profile.
Type a number as the VLAN ID to make the data be
identified while performing data transmission.
Enable – Click it to enable the default MAC address for
such profile.
Disable – Click it to type the MAC address manually for
such profile.
If Default MAC address is disabled, please specify a MAC
address from the drop down list for such profile.
Display the type for the IPv4 protocol for such profile.
Choose NAT or ROUTING as the operation mode for such
profile.
Type the IP address of the router for the LAN profile.
Use the drop down list to choose a suitable mask for the
LAN profile.
Such IP address is ready for matching with the function of
Virtual System.
Subnet Specify one 2
– click the icon to clear the IP setting.
nd
subnet which might be needed in the future.
85