Queue Number
Apply
Cancel
4.
Enter all the settings and click Apply.
5.
The outgoing filter for QoS Policer has been created.
Profile – type a new name for such service type.
Protocol –There are two options: TCP, UDP and
TCP/UDP. Select the protocol that you want to use.
Source Port Start /End - Type the start /end number for the
port range of the source port for such filter.
Destination Port Start / End - Type the start /end number
for the port range of the destination port for such filter.
Choose a queue number to category the packets matching
with the condition configured as above. Queue 7 is the
highest; 0 is the lowest.
Click it to save the configuration and exit the page.
Click it to exit the page without saving the configuration.
266
Vigor3900 Series User's Guide