Draytek Vigor3900 Series User Manual page 70

Apply
Cancel
If you choose DHCP as IPv4 protocol type, click the DHCP Tab to open the
following page:
Available parameters are listed as follows:
Item
Host Name
(Optional)
IP Alias
Click it to save the configuration and exit the dialog.
Click it to exit the dialog without saving the configuration.
Description
Type a name as the host name for identification.
Type other IP addresses to be bound to this interface. This
setting is optional. If you have typed addresses here, you can
see and choose it in later web page settings (e.g.,
NAT>>Port Redirection/DMZ Host).
To add a new IP address, click Add. Type the IP address and
use the drop down list to specify the subnet mask. Next,
click Save. The new one will be added and displayed on the
field under the box.
Add – click this button to have a field for adding a new IP
62 Vigor3900 Series User's Guide