Draytek Vigor3900 Series User Manual page 230

4. After filling the required information for Basic, click the Advanced tab to open the
following page.
Available parameters are listed as follows:
Item
Aggressive Mode
Local Peer ID
Remote Peer ID
Phase 1 Key Life
Time
Phase 2 Key Life
Time
Usually, use the default setting (leave it in blank).
Remote Host - Type the WAN IP address for the remote
host.
Remote IP / Subnet Mask - Type the LAN IP address and
LAN subnet mask for the remote host.
More Remote Subnet – Add more remote subnet in this
field if required.
Description
Enable – Click it to enable Aggressive Mode.
Disable – Click it to disable Aggressive Mode.
Type the ID for Vigor3900 which can be configured by the
remote end.
Peer ID is on behalf of the IP address while identity
authenticating with remote VPN server. The length of the ID
is limited to 47 characters.
The rekey-renegotiated period of the IKE Phase1 keying
channel of a connection. The acceptable range is from 5 to
480 minutes (8 hours).
The rekey-renegotiated period of the IKE Phase 2 keying
channel of a connection. The acceptable range is from 5 to
480 minutes (8 hours).
222 Vigor3900 Series User's Guide