Draytek Vigor3900 Series User Manual page 278

Delete
Refresh
Rename
Profile
Enable This Profile
Start IP
End IP
TX Limit
RX Limit
Enable Smart
Bandwidth Limit
Session Threshold
TX Limit
RX Limit
Apply
Cancel
H o w t o a d d a b a n d
H o w t o a d d a b a n d
1. Open Bandwidth Management>>Bandwidth Limit.
2. Simply click the Add button.
3. The following dialog will appear.
you to modify the corresponding settings for the selected
profile.
Remove the selected profile.
To delete a profile, simply select the one you want to delete
and click the Delete button.
Renew current web page.
Allow to modify the selected profile name.
Display the name of the bandwidth limitation profile.
Check the box to enable the Mirror function for the switch.
Display the start IP address for the profile.
Display the end IP address for the profile.
Display the limitation for the speed of the upstream for the
profile.
Display the limitation for the speed of the downstream for
the profile.
Check this radio button to configure the default limitation for
bandwidth for any LAN IP not included in the Limitation
List.
When session number exceeds the set threshold, Smart
Bandwidth limit will work.
Define the default speed of the upstream for Smart
Bandwidth Limit.
Define the default speed of the downstream for Smart
Bandwidth Limit.
Click it to save and exit the dialog.
Click it to discard the settings configured in this page.
w i d t h l i m i t p r o f i l e
w i d t h l i m i t p r o f i l e
270
f o r t h e Q o S p o l i c e
f o r t h e Q o S p o l i c e
Vigor3900 Series User's Guide
r
r