Draytek Vigor3900 Series User Manual page 81

Item
Profile
Enable This Profile
Protocol
Source IP Address
Source Mask
Destination IP
Address
Destination Mask
Load Balance Pool
/WAN Profile
Apply
Cancel
Vigor3900 Series User's Guide
Description
Type the name of the rule.
Check this box to enable such profile.
Choose a protocol (ALL, TCP, UDP, ICMP, FTP, TFTP,
HTTP, SMTP, POP3, TCP/UDP) for such rule applied to load
balance. All is the default setting.
Type a WAN IP address here as the source IP address for such
rule.
– click the icon to clear the IP setting.
Use the drop down list on the right to choose a suitable mask
for the source.
Type a WAN IP address here as the destination IP address for
such rule.
– click the icon to clear the IP setting.
Use the drop down list on the right to choose a suitable mask
for the destination.
Choose one of the profiles to be used by such rule. In which,
wan1 to wan5 profiles are configured in default. In addition,
profiles configured in WAN>>Load Balance Policy>> Pool
page also will be displayed here.
To have user-defined WAN profile, please refer to
WAN<<General Setup for detailed information.
Click it to save the configuration.
Click it to return to the factory setting.
73