If you choose DHCP-IA_NA as IPv6 protocol type, click the DHCPV6 Tab to open
the following page:
Available parameters are listed as follows:
Item
DHCP (IA_NA)
Gateway Address
DHCP (IA_NA)
DNS Address
Apply
Cancel
If you choose DHCP-IA_PD as IPv6 protocol type
It is not necessary for you to configure any web page.
Vigor3900 Series User's Guide
Description
Type the gateway IP address for IPv6 DHCP IA_NA mode.
Type your IPv6 primary DNS Server address.
Add – click this button to have a field for adding a new IP
address.
Save – click this button to save the setting.
– click the icon to remove the selected entry.
Click it to save the configuration and exit the dialog.
Click it to exit the dialog without saving the configuration.
69