NEC Univerge SV8100 Features And Specifications Manual page 1843

UNIVERGE SV8100
Program
Program Name
Number
47-20-04 Station Mailbox Message
Notification – Notification Type
47-20-05 Station Mailbox Message
Notification – Notification
Number
47-20-06 Station Mailbox Message
Notification – Notification Busy
Attempts
VM8000 InMail – Cascade Message Notification
Description/Comments
For the selected entry (1-5), use
this option to set the Message
Notification type. The choices are
Voice and Pager. Choose Voice
when the Phone Number entry is
to a regular office, home, or mobile
telephone. Choose Pager when
you want to deliver the notification
to a digital pager.
There are five separately
programmed Message notification
entries for each Subscriber
Mailbox.
For the selected entry (1-5), use
this option to set the telephone
number (16 digits maximum)
Message Notification will dial to
notify the subscriber of new
messages. Enter the number
exactly as you want the system to
dial it (including a leading 1 for toll
calls, if required), but do not
include a line access code (such
as 9). If the number you enter is
extension number, it will be an
Intercom call. Otherwise, it will be
an outside call. (The system
decides by referring its numbering
plan.)
There are five separately
programmed Message notification
entries for each Subscriber
Mailbox.
For the selected entry (1-5), use
this option to set how many times
InMail will retry an incomplete
Message Notification callout to a
busy destination. This option
applies to pager and non-pager
callouts. If the Busy Attempts and
RNA Attempts are both met, the
notification callout to the selected
entry is cancelled.
There are five separately
programmed Message notification
entries for each Subscriber
Mailbox.
Assigned Data
1
0 = Undefined
1 = Voice
2 = Pager
(default = 1)

Valid number up to 16
digits
(default not assigned)

1-99 Attempts
(default = 5)

Issue 11.0
Level
2 3
2 - 1811