NEC Univerge SV8100 Features And Specifications Manual page 1976

Issue 11.0
Program
Program Name
Number
22-02-01 Incoming Call Trunk Setup
25-02-01 DID/DISA VRS Message
25-06-01 VRS/DISA One-Digit Code
Attendant Setup – Next
Attendant Message Number
2 - 1944
Description/Comments
For each Night Service mode and
each trunk, enter 1 if trunk should
be automatically answered by
VRS Automated Attendant.
For each Night Service mode and
each trunk, enter 1 at the Talkie
prompt if trunk should be
automatically answered by VRS
and the message number the
caller should hear (1~4).
Set up single digit dialing for
Automated Attendant callers. For
each VRS Message programmed
to answer outside calls (see
Program 25-02-01), specify the
digit the Automated Attendant
#
caller dials (1~9, 0, , ).
If the dialed digit is an option to
leave a message, this should be
set to 106.
If the dialed digit is to play another
VRS message, this should be set
to the message number (001-004).
Voice Response System (VRS) Embedded VRS
UNIVERGE SV8100
Assigned Data
1
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
0 = No Message
1 = VRS (01~004 VRS
Message Number)
2 = ACI (01~04 ACI
Group Number)
3 = Department
Groups (01~64
Extension Group
Number)
(default = 0)
0~100 (0 = No Setting)
101 = Voice MAil
Answers
104 = Refer to 25-04:
VRS/DISA Transfer
Ring Group with No
Answer/ Busy
105 = Dial the other
extension
106 = Take embedded
VRS message
(default = 0)
Level
2 3


