Issue 11.0
Program
Program Name
Number
11-07-01
Department Group Pilot
Numbers – Dial
14-02-23
Analog Trunk Data Setup –
Caller ID Receiving Method
15-03-03
Single Line Telephone Basic
Data Setup – Terminal Type
15-03-09
Single Line Telephone Basic
Data Setup – Caller ID Function -
For External Module
15-05-18
IP Telephone Terminal Basic
Data Setup – IP Duplication
Allowed Group
15-07-01
Programmable Function Keys
16-01-01
Department Group Basic Data
Setup – Department Name
2 - 1620
Description/Comments
Assign a Department Group pilot
number for the Voice Mail (eight
digits maximum). The extensions
are assigned to the group in
Program 16-02-01.
Rings extension before receiving
Caller ID (1) or after receiving
Caller ID (0).
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always
enter 1 (e.g., receive DTMF
tones).
Enable/Disable the Caller IFD FSK
signal for an external Caller ID
rd
Module or a 3
-Party vendor
telephone with Caller ID display.
If voice mail is used, set this to 0
for the system integration code to
be correct.
If an adapter has one IP address
coming into it but multiple
extensions off of it, assign all the
extensions to a group so the CPU
knows that the one IP address is
assigned to multiple extensions.
Assign a function key as an
Account Code key (code 50). Use
this key instead of the dial pad to
enter the before and after the
Account Code.
ICM key required. CAP, Headset
and Application keys are optional.
CO keys are not supported.
Assign a name to the Extension
(Department) Groups.
UCB (Unified Communications for Business)
UNIVERGE SV8100
Assigned Data
1
Up to eight digits
(default not assigned)
0 = Wait Caller ID
1 = Immediate Ring
(default = 1)
0 = Normal
1 = Special
(default = 0)
0 = Disable (Off)
1 = Enable (On)
(default = 0)
0 = Not Used
1 = Group 1
2 = Group 2
3 = Group 3
4 = Group 4
5 = Group 5
6 = Group 6
7 = Group 7
8 = Group 8
9 = Group 9
10 = Group 10
(default = 0)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~
99
(Appearance Function
Code) (Service Code
752 by default)
Maximum 12
characters
(default not assigned)
Level
2
3