NEC Univerge SV8100 Features And Specifications Manual page 1957

UNIVERGE SV8100
Program
Program Name
Number
22-15-07 VRS Delayed Message for
Department Group – Disconnect
Time After the End of VRS
Delayed Message
24-02-03 System Options for Transfer –
Delayed Call Forwarding Time
25-01-02 VRS/DISA Line Basic Data Setup
– DISA User ID
25-02-01 DID/DISA VRS Message
25-03-01 VRS/DISA Transfer Ring Group
With Incorrect Dialing
Voice Response System (VRS)
Description/Comments
For each Department Group, set
the time the system waits after
playing the VRS message before
disconnecting the call. To prevent
the call from disconnecting, set
this option to 0. This program is
also used for VRS Waiting
Message.
Set the time a telephone rings
before the call reroutes to the
programmed destination.
Select whether or not the DISA
User ID is to be used.
For each Night Service mode,
enter 1 at the Talkie prompt if
trunk should be automatically
answered by VRS and the
message number the caller should
hear (1~101).
Set the destination that Automated
Attendant (OPA) calls ring if the
OPA caller dials an incorrect
extension number. This also sets
the options for DISA calls. The
system allows Ring Groups or
Disconnect.
Assigned Data
1
0 = No Disconnect
1~64800 Seconds
(default = 60)
0~64800 (seconds)
(default = 10)
0 = Off
1 = On
(default = 1)
0 = No Message
1 = VRS (01~100 VRS
Message Number)
2 = ACI (01~04 ACI
Group Number)

3 = Department
Groups (01~64
Extension Group
Number)
(default = 0)
Ring Groups:
1~100
Trunk Ports:
001~200
Day/Night Mode:
1~8
0 (Disconnect)
1~100 (Incoming Ring

Group)
102 (In-Skin/External
Voice Mail or VM8000
InMail)
104 (Speed Dial table
Program 25-15-01)
Version 3000 software
or higher is required.
(default = 0)
Issue 11.0
Level
2 3



2 - 1925