NEC Univerge SV8100 Features And Specifications Manual page 1367

UNIVERGE SV8100
To program a key, press Speaker, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
For this feature...
Do Not Disturb
Do Not Disturb/Call
Forward Override
General Purpose
Relay
Group Call Pickup
Handset Cutoff
Hotline
Headset Operation
Hold
Codes Tables
press the key and enter the code (e.g., 48 for Voice Over).
Use this key...
Code: 03
Operation: Press key
+ code (0~4)
Code: 37
Operation: Press key
Code: 51 + relay
number
Operation: Press key
Code: 24
Operation: Speaker
key +
Press key
Code: 25
Operation: Speaker
key +
Press key
Code: 26 + Pickup
Group (1~8 or 1~9 or
01~64)
Operation: Speaker
key + Press key +
Pkup Group
Code: 40
Operation: Press key
Code: 01 + dest. ext
Operation: Press key
Code: 05
Operation: Press key
Code: 44
Operation: Place or
answer call + Press
key
Code: 45
Operation: Place or
answer call + Press
key
When your are...
Setting your telephone in
DND
Calling an extension which
is in DND or Call
Forwarded
Activating the general
purpose relay
Answering a call ringing
another telephone in your
Pickup Group
Answering a call ringing a
telephone in another
Pickup Group – if you do
not know the group
number
Answering a call ringing a
telephone in a specific
Pickup Group
Cutting off the handset
transmission while on a
call
Placing a call to your
Hotline partner
Enabling or disabling
Headset Operation
Putting a call on System
Hold (if your telephone's
Hold key is reassigned)
Putting a call on Exclusive
Hold
Issue 1.0
Also See
Key Lamp Status
Srvc Code
DND key on red
None
On when active
None
None
None
On when feature
active (no
transmission on
handset)
Full BLF (red) for
covered ext.
On red when
activated
None
None
747
-
780
#
769
768
-
-
688
-
-
3 - 27