NEC Univerge SV8100 Features And Specifications Manual page 1041

UNIVERGE SV8100
Program
Program Name
Number
10-46-01 DT700 Series Server Information
Setup – Register Mode
15-05-27 IP Telephone Terminal Basic Data
Setup – Personal ID Index
15-05-28 IP Telephone Terminal Basic Data
Setup – Addition Information
Setup
15-07-01 Programmable Function Keys
30-01-01 DSS Console Operating Mode
30-02-01 DSS Console Extension
Assignment – Extension Number
30-03-01 DSS Console Key Assignment
SV8100 Features and Specifications Manual
Description/Comments
0 = Normal mode:
When the phone boots up it will
report the ext. assigned in the
phone or choose the next available
extension in the system. No
password is required.
1= Auto:
If set to Auto then the SIP user
name and password must be
entered into the actual IP phone.
These settings must match 84-22/
15-05-27, or the phone will not
come on-line.
2 = Manual:
When the phone boots up it will
prompt user to enter a user id and
password before logging in. It
checks this user id/password
against 84-22/15-05-27. If there is
no match, the phone will not come
on-line.
Used when the SIP Multiline
telephone is using manual/auto
registration. Assign each phone a
unique personal index. Then go to
command 84-22 to assign the user
name and password.
Talking Party Off Set to 0 for
Desktop Application softphone
Used to assign function keys to
terminals.
Set the mode of the system DSS
Consoles. The available options
are Regular (Business) Mode (0),
Hotel Mode (1), ACD Monitor Mode
(2) or Business/ACD Mode (3).
The extension number for the
multiline terminal connected with
the DSS console (up to eight digits).
For DSS Console Chaining, assign
an Speed Dialing Service Code (or
) plus a 2-digit bin number to a DSS
Console key.
Assigned Data
0 = Normal
1 = Auto
2 = Manual
(default = 0)
0~512
(default = 0)
0 = Disable
1 = Enable
(default = 0)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
0 = Business Mode
1 = Hotel Mode
2 = ACD Monitor Mode
3 = Business/ACD Mode
(default = 0)
Up to eight digits.
(default not assigned)
Key Number
001~500
0~99 (General Functional
Level)
97 = Door Box Access
key (additional data: 1~8
Door Box No.)
00 ~ 99
(Appearance Functional
Level)
Issue 1.0
Level
1 2 3
2 - 1017