NEC Univerge SV8100 Features And Specifications Manual page 1318

Issue 1.0
Program
Program Name
Number
25-07-03 System Timers for VRS/DISA –
Disconnect after VRS/DISA
retransfer to IRG
25-08-01 DISA User ID Setup – Password
25-13-01 System Option for DISA – VRS
Message Access Password
31-02-01 Internal Paging Group
Assignment – Internal Paging
Group Number
31-02-02 Internal Paging Group
Assignment – Internal All Call
Paging Receiving
31-04-01 External Paging Zone Group –
Paging Group Number
2 - 1294
Description/Comments
Set the timer for disconnecting a
call after it is re-transferred to a ring
group by VRS/DISA.
Set up password (six digits).
Enter the password DISA callers
must dial before the system allows
them to record, listen to or erase
VRS messages.
Assign extensions to Internal
Paging Groups (i.e., Page Zones).
Enable or Disable All Call Internal
Paging for each extension. If
allowed, extension can place and
receive All Call Internal Paging
announcements. If prevented,
extensions can only make (not
receive) All Call Internal Paging
announcements. If combined,
Paging zones should be restricted
as well, change the internal page
zone group in Program 31-07-01 to
0.
Use to assign each External Paging
zone to an External Paging group.
UNIVERGE SV8100
Assigned Data
0~64800 (seconds)
(default = 60 seconds)
ID 01 = 000001
ID 02 = 000002
:
ID 15 = 000015
#
1~ 9, 0, ,
Six digits fixed
(default not assigned)
0~64
(0 = No Setting)
Default: 1
0 for IP Station
1 for TDM Station
0 = Off
1 = On
(default = 1)
0~8 (0 = No Setting)
Default:
Speaker 1 [PGD(2)-U( )]
= 1 (Group 1)
Speaker 2 [PGD(2)-U( )]
= 2 (Group 2)
Speaker 3 [PGD(2)-U( )]
= 3 (Group 3)
Speaker 4 [PGD(2)-U( )]
= 4 (Group 4)
Speaker 5 [PGD(2)-U( )]
= 5 (Group 5)
Speaker 6 [PGD(2)-U( )]
= 6 (Group 6)
Speaker 7 [PGD(2)-U( )]
= 7 (Group 7)
Speaker 8 [PGD(2)-U( )]
= 8 (Group 8)
Speaker 9
(CD-CP00-AUII) = 1
(Group 1)
Voice Response System (VRS)
Level
1 2 3