NEC Univerge SV8100 Features And Specifications Manual page 1326

Issue 1.0
Related Features
term
D series i Multiline Terminals
SV8100/SV8300 Terminals
Off-Hook Signaling
SV8100/SV8300 Terminals
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
15-02-27 Multiline Telephone Basic Data
Setup – Handset Volume
Operation
To adjust the volume of incoming ringing and splash tone:
1. If the telephone is idle, press Speaker and dial 729. If the telephone is ringing, skip to Step 2.
2. Press VOLUME
To adjust the volume of ringing incoming Paging announcements, Handsfree, the handset or
Background Music:
1. Press VOLUME
The feature must be active to change the volume. Pressing the volume keys when the telephone is idle adjusts the
display contrast.
2 - 1302
This option determines whether a
multiline terminal handset volume
changes back to the system default
(0) or whether it is retained at the
user's setting (1) after hanging up
the handset. This command also
controls LCD Contrast, Off-Hook
Ringing Volume, Station Ringing
Volume and Speaker Volume.
or VOLUME .
or VOLUME .
Description/Comments
UNIVERGE SV8100
Assigned Data
0 = Back to Default
(Back)
1 = Stay at previous level
(Stay)
(default = 1)
Volume Controls
Level
1 2 3