NEC Univerge SV8100 Features And Specifications Manual page 1010

Issue 1.0
Program
Program Name
Number
35-02-01 SMDR Output Options – Toll
Restricted Call
35-02-02 SMDR Output Options – PBX Calls When the system is behind a PBX,
35-02-03 SMDR Output Options – Trunk
Number or Name
35-02-04 SMDR Output Options – Summary
(Daily)
35-02-05 SMDR Output Options – Summary
(Weekly)
35-02-06 SMDR Output Options – Summary
(Monthly)
35-02-07 SMDR Output Options – Toll
Charge Cost
35-02-08 SMDR Output Options – Incoming
Call
35-02-09 SMDR Output Options – Extension
Number or Name
35-02-10 SMDR Output Options – All Lines
Busy (ALB) Output
35-02-12 SMDR Output Options – DID Table
Name Output
35-02-13 SMDR Output Options – CLI
Output When DID to Trunk
35-02-14 SMDR Output Options – Date
2 - 986
Description/Comments
SMDR can include or exclude calls
blocked by Toll Restriction.
SMDR can include all calls or just
calls dialed using the PBX trunk
access code.
Select whether the system should
display the trunk name (0) or the
number (1) on SMDR reports.
If this option is set to 0,
Program 35-02-14 must be set
to 0.
Set this option to (1) to have the
SMDR report provide a daily
summary (at midnight every night).
Set this option to (1) to have the
SMDR report provide a weekly
summary (every Saturday at
midnight).
Set this option to (1) to have the
SMDR report provide a monthly
summary (at midnight on the last
day of the month).
Set this option to (1) have the
SMDR report include toll charges.
Enable this option (1) to have the
SMDR report include incoming calls.
If you disable this option (0),
incoming calls do not print.
Set this option (1) to have the
SMDR report include extension
numbers. Set this option (0) to have
the SMDR report include extension
names.
Determine if the All Lines Busy
(ALB) indication should be
displayed.
Determine if the DID table name
should be displayed for incoming
DID calls.
Determine if the Caller ID should be
displayed when the incoming DID
number is transferred to an outgoing
trunk.
Determine whether the date should
be displayed on SMDR reports.
This option must be set to 0 if
the trunk name is set to be
displayed in Program
35-02-03.
UNIVERGE SV8100
Assigned Data
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Name
1 = Number
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Name
1 = Number
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 0)
0 = Not Displayed
1 = Displayed
(default = 0)
0 = Not Displayed
1 = Displayed
(default = 0)
0 = Not Displayed
1 = Displayed
(default = 0)
Station Message Detail Recording
Level
1 2 3