NEC Univerge SV8100 Features And Specifications Manual page 1289

UNIVERGE SV8100
Program
Program Name
Number
45-01-14 Voice Mail Integration Options –
CCIS Centralized Voice Mail
Number
45-01-15 Voice Mail Integration Options –
Analog Voice Mail Protocol
Selection
45-01-16 Voice Mail Integration Options –
Voice Mail FAX Digit Add
Assignment
45-01-17 Voice Mail Integration Options –
Reply Mail Box Number
45-01-18 Voice Mail Integration Options –
Trunk Number Mapping
45-04-01 Voice Mail Digit Add Assignment
– Remote Logon (Internal)
45-04-02 Voice Mail Digit Add Assignment
– Direct Logon
45-04-03 Voice Mail Digit Add Assignment
– Transfer Message
45-04-04 Voice Mail Digit Add Assignment
– Forward-All
45-04-05 Voice Mail Digit Add Assignment
– Forward-Busy
45-04-06 Voice Mail Digit Add Assignment
– Forward RNA
45-04-07 Voice Mail Digit Add Assignment
– Remote Logon
45-04-08 Voice Mail Digit Add Assignment
– Conversation Recording
45-04-09 Voice Mail Digit Add Assignment
– Clear Down String
45-05-01 Voice Mail Send Protocol Signal
Without Additional Digits –
Remote Log-On Internal
45-05-02 Voice Mail Send Protocol Signal
Without Additional Digits – Direct
Log-On
SV8100 Features and Specifications Manual
Description/Comments
Assign the pilot number to
Centralized Voice Mail over CCIS
Link. This is assigned only in
the remote switches.
Assign whether DTMF sent to the
Analog VM follows the Fixed (0) or
the Programmed (1) leading digits.
Program 45-04-01~09 is where the
programmed digits are assigned.
Assign the leading digits (up to
four) to show in front of extension
numbers sent to Analog ports
assigned to 1 (Yes) in Program
15-03-16.
Whether or not to include the
mailbox number in the analog voice
mail protocol.
Assign the digits of trunk number
mapping.
Use to define the digits for remote
logon (internal).
Use to define the digits for direct
logon.
Use to define the digits for transfer
message.
Use to define the digits for forward
all.
Use to define the digits for forward
busy.
Use to define the digits for forward
RNA.
Use to define the digits for remote
logon.
Use to define the digits for
conversation recording.
Use to define the digits for clear
down string.
Use to send trunk number and/or
station number information if
integrating to Voice Mail when
Program 45-04-XX is left blank and
45-01-15 is set to Program.
Use to send trunk number and/or
station number information if
integrating to Voice Mail when
Program 45-04-XX is left blank and
45-01-15 is set to Program.
Assigned Data
Dial (up to eight digits)
(default not assigned)
0: Fixed
1: Program
(default = 0)
Up to four digits
(default = 0)
0 = No
1 = Yes
(default = 1)
2~3
(default = 2)
Up to four digits
(default not assigned)
Up to four digits
(default not assigned)
Up to four digits
(default not assigned)
Up to four digits
(default not assigned)
Up to four digits
(default not assigned)
Up to four digits
(default not assigned)
Up to four digits
(default not assigned)
Up to four digits
(default not assigned)
Up to four digits
(default not assigned)
0:Off
1:On
(default = 0)
0:Off
1:On
(default = 0)
Issue 1.0
Level
1 2 3
2 - 1265