NEC Univerge SV8100 Features And Specifications Manual page 1364

Issue 1.0
To program a key, press Speaker, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
For this feature...
Speed Dialing
Account Codes
Automatic Call
Distribution (ACD)
3 - 24
press the key and enter the code (e.g., 48 for Voice Over).
Use this key...
Code: 27
Operation: Press key
+ bin + Line or Speaker
key
Code: 28
Operation: Press key
+ bin + Line or Speaker
key
Code: 50
Operation: Press key
+ Dial Account Code
Code: 10
Operation: Press key
to log in
Press key + 1 to log out
or 0 to cancel
Code: 12
Operation: Press key
Code: 13
Operation: Press key
Code: 14
Operation: Press key
+ Press 1 (Yes) or 2
(No)
Code: 15
Operation: Call busy
ACD agent + Press key
When your are...
Dialing a stored System
Speed Dialing number
Dialing a stored Group
Speed Dialing number
Entering Account Codes
Basic Operation
Logging in or out of an
ACD Group
Emergency Call
Placing or receiving an
Emergency Call
Rest Mode
Enabling/disabling Rest
Mode
Out of Service
Taking an ACD Group out
of Service (for Group
Supervisors only), or
Taking all ACD Groups out
of service (for System
Supervisors only)
Terminal Monitor
Monitoring an ACD
Agent's conversation
UNIVERGE SV8100
Also See
Key Lamp Status
Srvc Code
None #2 + bin
None # 4 + bin
None
On red when
logged in
Off when logged
out
On while calling
your supervisor or
after being
answered by your
supervisor
Flashing fast at
the supervisor
while ringing
On red when Rest
Mode enabled Off
when Rest Mode
disabled
On red when the
group is out of
service.
On red while
monitoring
Off when not
monitoring
Codes Tables
-
-
-
-
-