NEC Univerge SV8100 Features And Specifications Manual page 1030

Issue 1.0
Program
Program Name
Number
35-02-06 SMDR Output Options –
Summary (Monthly)
35-02-07 SMDR Output Options – Toll
Charge Cost
35-02-08 SMDR Output Options –
Incoming Call
35-02-09 SMDR Output Options –
Extension Number or Name
35-02-10 SMDR Output Options – All Lines
Busy (ALB) Output
35-02-11 SMDR Output Options – Walking
Toll Restriction Table Number
35-02-12 SMDR Output Options – DID
Table Name Output
35-02-13 SMDR Output Options – CLI
Output When DID to Trunk
35-02-14 SMDR Output Options – Date
35-02-15 SMDR Output Options – CLI/DID
Number Switching
35-02-16 SMDR Output Options – Trunk
Name or Received Dialed
Number
2 - 1006
Description/Comments
Set this option to (1) to have the
SMDR report provide a monthly
summary (at midnight on the last
day of the month).
Set this option to (1) have the
SMDR report include toll charges.
Enable this option (1) to have the
SMDR report include incoming
calls. If you disable this option (0),
incoming calls do not print.
Set this option (1) to have the
SMDR report include extension
numbers. Set this option (0) to
have the SMDR report include
extension names.
Determine if the All Lines Busy
(ALB) indication should be
displayed.
Use to set the SMDR (Station
Message Detail Recording)
walking toll restriction table number
output options for each of the eight
SMDR ports.
Determine if the DID table name
should be displayed for incoming
DID calls.
Determine if the Caller ID should
be displayed when the incoming
DID number is transferred to an
outgoing trunk.
Determine whether the date should
be displayed on SMDR reports.
This option must be set to 0 if
the trunk name is set to be
displayed in Program
35-02-03.
Enter 0 to display the Caller ID
number. Determine if the Caller ID
number (0), or DID number (1)
should be displayed in the SMDR
output.
Determine how the SMDR should
print incoming calls on ANI/DNIS or
DID trunks. If set to (1), ANI/DNIS
trunks can print DNIS digits. For
DID trunks, if the received number
is not defined in Program 22-11-01,
a number is not printed. If set to (0)
trunk names are printed instead
(as assigned in Program 14-01-
01).
SV8100 Communications Analyst Enterprise
UNIVERGE SV8100
Assigned Data
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Name
1 = Number
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 0)
0 = No Output
1 = Output
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 0)
0 = Not Displayed
1 = Displayed
(default = 0)
0 = Not Displayed
1 = Displayed
(default = 0)
0 = CLI (CLIP)
1 = DID Number
(default = 0)
0 = Trunk Port Name
1 = Received Dialed
Number
(default = 0)
Level
1 2 3