NEC Univerge SV8100 Features And Specifications Manual page 1255

UNIVERGE SV8100
Program
Program Name
Number
47-01-15 VM8000 InMail System Options –
Send Pager Callout Until
Acknowledged
47-01-16 VM8000 InMail System Options –
Name Format
47-01-17 VM8000 InMail System Options –
In-Mail Port
47-02-01 VM8000 InMail Station Mailbox
Options – Mailbox Type
SV8100 Features and Specifications Manual
Description/Comments
When this option is enabled (1),
VM8000 InMail continues to retry a
digital pager Message Notification
callout until the notification is
acknowledged. If this option is
disabled (0), VM8000 InMail retries a
digital pager Message Notification
the number of times specified in 47-
01-14 Number of Callout
Attempts. This option does not
apply to Message Notification
callouts to telephone numbers.
A digital pager notification is
considered acknowledged when the
recipient logs onto the mailbox.
Specify if names are displayed in
First Last format or Last First.
Specify the port number of the first
In-Mail Port.
Setting this program requires a
CP00 reset in order for the
changes to take effect.
Use this option to Enable or Disable
the mailbox. An extension mailbox is
not accessible when it is disabled
(even though its stored messages
and configuration are retained in
memory.) If disabled, a user
pressing Message initiates a remote
logon and is asked to enter their
mailbox number. A voice prompt
then announces: That mailbox does
not exist.
To make programming easier,
consider associating a mailbox
number with a station port. For
example, mailbox 1 could
correspond to port 1, which in turn
corresponds to extension 101.
Assigned Data
0 = No (Disabled)
1 = Yes (Enabled)
(default =0)
0 = 1st Last
1 = Last 1st
(default = 0)
0~497
The first port of In-Mail
must start with one of the
following ports:
1, 5, 9, 12, 16, ......237,
241, 245, 249 and uses
the first port assigned +
next three consecutive
ports.
(default = 0)
0 = None
1 = Personal
2 = Group
(default = 1)
Issue 1.0
Level
1 2 3
2 - 1231