Factory Settings - NETGEAR R7500 User Manual

Factory Settings

You can return the router to its factory settings. Use the end of a paper clip or a similar object
to press and hold the Reset button on the back of the router for at least seven seconds. The
router resets and returns to the factory configuration settings shown in the following table.
Table 8. Factory default settings
Feature
Router login User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Port speed
Local network LAN IP
(LAN)
Subnet mask
DHCP server
DHCP range
Time zone
DHCP starting IP address
DHCP ending IP address
DMZ
Time zone
Time adjusted for daylight saving
time
SNMP
Firewall Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Source MAC filtering
Nighthawk X4 AC2350 Smart WiFi Router
Default Behavior
www.routerlogin.com or www.routerlogin.net
admin
password
Use default hardware address
1500
AutoSensing
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
Pacific time
192.168.1.2
192.168.1.254
Disabled
GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA
Disabled
Disabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Supplemental Information
34