To enable Dynamic QoS:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select Dynamic QoS.
5.
Select the Enable Dynamic QoS check box.
6.
Specify your Internet bandwidth.
You must specify your Internet bandwidth so that Dynamic QoS can perform bandwidth
allocation and traffic prioritization.
To allow Speedtest to detect your Internet bandwidth (recommended):
For more accurate Speedtest results, make sure that no other devices are accessing
the Internet.
d. Click the Speedtest button.
Speedtest determines your Internet bandwidth.
7.
Click the Apply button.
Your settings are saved.
A link displays on the bottom of the screen to view bandwidth utilization. Clicking the link
displays the Attached Devices screen. For more information, see
on the Network
Nighthawk X4 AC2350 Smart WiFi Router
on page 110.
Optimize Performance
42
View Devices Currently